THIS BUNDLE CONSISTS OF THE FOLLOWING:
- 2 Advanced Cable Tester v2 HDMI Type-A to HDMI Type-A modules
- 2 Advanced Cable Tester v2 DisplayPort to DisplayPort modules
Please note, these modules are only compatible with the Advanced Cable Tester v2
These Advanced Cable Tester v2 modules enable testing of HDMI cables and DisplayPort cables.
- Short testing - Dynamic visualization of test results
- Open testing - Dynamic visualization of test results
- Continuity testing - Dynamic visualization of test results
- DC resistance measurement for most wires, with milliohm precision on ground and power wires, ohm resolution on most other wires, continuity check only on high-speed data lines
- Signal integrity testing of data lines to 12.8 Gbps per channel
Left: passing eye diagram for HDMI Ethernet line. Right: passing HDMI 2.1 High Speed data line at 12 Gbps.
Left: passing eye diagram for DP 1.4 at 10 Gbps per lane. Right: failing eye diagram for DP 1.4 at 10 Gbps per lane
Other connector modules are available:
- USB Type-C to USB Type-C (USB 3.2 and earlier specifications). Full-Featured and USB 2.0 Type-C cables are supported
- USB Type-C to USB Standard-A (USB 3.2 and earlier version specifications)
- USB Type-C to USB Micro-B (USB 3.2 and earlier version specifications)
- USB Type C to USB Standard-B (USB 3.2 and earlier version specifications)
- USB Standard-A to USB Micro-B (USB 3.2 and earlier version specifications)
- USB Standard-A to USB Standard-B (USB 3.2 and earlier version specifications)
- Lightning (USB 2.0) to USB Standard-A
- Lightning (USB 2.0) to USB Type-C