ACT v2 Connector Module: USB Type-C to USB 3.1 Standard-A

$400

Part Number: TP820210

Availability: Limited Availability

The Advanced Cable Tester v2 Connector Module: USB Type-C to USB 3.1 Standard-A enables testing of cables with USB 3.2/USB 3.1/USB 2.0 Type-C on one end and USB Standard-A on the other end of the cable, using the Total Phase Advanced Cable Tester v2.

For volume discounts over Qty 10, please contact sales at sales@totalphase.com

Key Features

Test Compatibility/Coverage

USB 2.0 Hi-Speed wire pair

USB 3.1 Gen1/Gen2 and USB 3.2 SuperSpeed wire pairs (Tx+Rx)

Continuity/Shorts/Opens testing with dynamic visualization of test results

VBUS and GND DC resistance testing

VBUS and GND individual pin DC resistance testing for the USB Type-C connector

Measurement of Rp

Signal integrity testing of data lines up to 12.8 Gbps per channel

Testing of USB 2.0 pairs is supported at about 518 Mbps, and any present SuperSpeed pairs tested at 5 Gbps or 10 Gbps

Insertions

Insertion/test count tracking ensures reliable operation

By using the highest quality connectors, the expected life span without any test degradation for the Type-C to Standard-A module is 5,000 tests per module

All connector modules require the use of the Total Phase Advanced Cable Tester v2

Tech Specs

Connections

Each module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only
1 USB Type-C receptacle and 1 USB 3.1 Standard-A receptacle

Operating Temperature

10º–35º C (50º–95º F)

1 ACTv2 Connector Module: USB Type-C to USB 3.1 Standard-A

Minimum Hardware Requirements

Requires the Advanced Cable Tester v2

Software

Included with the Advanced Cable Tester v2

Dimensions and Weight

W x D x H: 19.4 mm. x 3.8mm. x 3.5 mm (7 5/8 in. x 1 1/2 in. x 1 3/8 in.) excluding attachment pins
90 g (2.5 oz)

ACT v2 Connector Module: USB Type-C to USB 3.1 Standard-A

Key Features

Tech Specs

Resources

User Manual

Quick Start Guide

Downloads

Support

Datasheet

Related Products