ACT v2 Connector Module: USB Type-C to Lightning USB2
$400
Part Number: TP823110
Availability: In-Stock
- Buy 10 for FREE each and save 350%
- Buy 25 for FREE each and save 300%
This module enables testing of cables with USB 2.0 Type-C on one cable end and Apple Lightning USB2 on the other cable end using the Advanced Cable Tester v2.
Please note, this module is compatible with the Advanced Cable Tester v2
The Advanced Cable Tester v2 Connector Module: USB Type-C to Lightning USB2 enables testing of cables with USB 2.0 Type-C on one cable end and Apple Lightning USB2 on the other cable end using the Total Phase Advanced Cable Tester v2.
- Verify proper power on for the Lightning plug
- Individually measure the DC resistance of VBUS and GND wires
- Individually measure the DC resistance of VBUS and GND pins in the USB Type-C connector
- Verify wiring is correct with no shorted or disconnected wires
- Signal Integrity testing of USB 2.0 pairs is supported at about 518 Mbps
- Quiescent current test pass/fail reported
- Over-voltage protection test pass/fail reported
- Voltage recovery test pass/fail reported
- This is all you will need for testing USB Type-C to Lightning USB2 cables
Apple MFi membership required to run these tests
Left: passing USB Type-C to Lightning USB2 eye diagram. Right: failing USB Type-C to Lightning USB2 eye diagram.
Other connector modules are available:
- USB Type-C to USB Type-C (USB 3.2 and earlier specifications). Full-featured and USB 2.0 Type-C cables are supported
- USB Type-C to USB Standard-A (USB 3.2 and earlier version specifications)
- USB Type-C to USB Micro-B (USB 3.2 and earlier version specifications)
- USB Type-C to USB Standard-B (USB 3.2 and earlier version specifications)
- USB Standard-A to USB Micro-B (USB 3.2 and earlier version specifications)
- USB Standard-A to USB Standard-B (USB 3.2 and earlier version specifications)
- Lightning (USB 2.0) to USB Standard-A
- HDMI to HDMI (HDMI 2.1 and earlier version specifications)
- DisplayPort to DisplayPort (DisplayPort 1.4 and early version specifications)
Test Compatibility
- Power on for Lightning plug
- USB 2.0 (DP/DM) signal integrity testing
- VBUS DC resistance testing
- GND DC resistance testing
- Combined value of VBUS and GND DC resistance reported against specification
- Quiescent current testing
- Over-voltage protection testing
- Voltage recovery testing
Apple MFi membership required to run these tests
Insertions
- Insertion/test count tracking ensures reliable operation
- Total Phase uses the highest quality connectors available in our Advanced Cable Tester devices. The expected life span for this module is 5,000 insertions/tests. Your experience may vary based upon your local environment.
What’s Included
- Advanced Cable Tester v2 Connector Module: USB Type-C to Lightning USB2 (requires Total Phase Advanced Cable Tester v2)
Quality
- REACH, RoHS, China RoHS
- Manufacturing: ISO 9001, ISO 13485, AS9100C, ITAR
- Warranty for 90 days or 1000 insertions, whichever comes first.
Connections
- Each module utilizes a proprietary finger style connector for use with Advanced Cable Tester v2 only
- Apple Lightning to USB Type-C module has 1 Apple Lightning receptacle and 1 USB Type-C receptacle
Dimensions
- W x D x H: 19.4 mm. x 3.8mm. x 3.5 mm excluding attachment pins
(7 5/8 in. x 1 1/2 in. x 1 3/8 in.)
Weight
- 90 g (2.5 oz)
Operating Temperature
- 10º–35º C (50º–95º F)
Note
- The Advanced Cable Tester v2 connector modules are accessories for the Advanced Cable Tester v2