Please note, this module is compatible with the Advanced Cable Tester v2.
The Advanced Cable Tester v2 Connector Module: USB Type-C to USB Type-C enables testing of cables with USB 2.0/USB 3.1/USB 3.2 Type-C on both cable ends using the Total Phase Advanced Cable Tester v2.
- Individually measure the DC resistance of VBUS and GND wires
- Individually measure the DC resistance of VBUS and GND pins in the USB Type-C connector
- Verify wiring is correct with no shorted or disconnected wires
- Testing of USB 2.0 pairs is supported at about 518 Mbps, and any present SuperSpeed pairs tested at 5 Gbps or 10 Gbps
- Validate E-Marker accuracy
- This is all you will need for testing USB Type-C cables, whether full-featured (USB 3.1 Gen1, USB 3.1 Gen2, or USB 3.2) or USB 2.0
Left: passing eye-diagram 10 Gbps USB Type-C to USB Type-C cable. Right: failing eye-diagram USB2 data line for USB Standard-A to USB Standard-B cable.
Other connector modules are available:
- USB Type-C to USB Standard-A (USB 3.2 and earlier version specifications)
- USB Type-C to USB Micro-B (USB 3.2 and earlier version specifications)
- USB Type-C to USB Standard-B (USB 3.2 and earlier version specifications)
- USB Standard-A to USB Micro-B (USB 3.2 and earlier version specifications)
- USB Standard-A to USB Standard-B (USB 3.2 and earlier version specifications)
- Lightning (USB 2.0) to USB Standard-A
- Lightning (USB 2.0) to USB Type-C
- HDMI to HDMI (HDMI 2.1 and earlier version specifications)
- DisplayPort to DisplayPort (DisplayPort 1.4 and early version specifications)