Videos

The following online videos, podcasts and tutorials are designed to help users learn how to take advantage of the features of Total Phase embedded systems development tools.


easily change voltage levels using our Control Center Software and Promira Serial Platform.

See how to easily debug the USB bus in real time using the Beagle USB 480 Protocol Analyzer and Data Center Software

 

 

easily change voltage levels using our Control Center Software and Promira Serial Platform.

Watch to see how to easily change voltage levels using our Control Center Serial Software and Promira Serial Platform.

 

 

Record & Playback CAN using the Komodo CAN Duo Interface & Data Center

Using the Data Center Software and Komodo GUI, see how to easily record and playback CAN traffic with the Komodo CAN Duo Interface.

 

Debug USB with the Total Phase Beagle USB 5000 v2 SuperSpeed Protocol Analyzer

See how the Beagle USB 5000 v2 SuperSpeed Protocol Analyzer can quickly monitor and debug USB 2.0 and USB 3.0 traffic in real time. 

 

 

Testing HDMI Cable Using the Advanced Cable Tester v2

See how to quickly and easily program an I2C EEPROM using the Aardvark™ I2C/SPI Host Adapter and the free Control Center™ Serial Software

 

Testing HDMI Cable Using the Advanced Cable Tester v2

This video demonstrates how the Advanced Cable Tester v2 can comprehensively test HDMI cables against the cable specification and how users can easily create a custom test profile for their own testing requirements.

 

Advanced Cable Tester v2 Demonstration

This video demonstrates how the Advanced Cable Tester v2 can comprehensively test a variety of cables quickly and easily. Learn how.

 

 

 

I2C System Prototyping

This video demonstrates how the Aardvark I2C/SPI Host Adapter and the Beagle I2C/SPI Protocol Analyzer can be used to quickly evaluate and prototype an I2C-based system that uses a 3-axis accelerometer.

 

 

Monitor VBUS Current and Voltage with Beagle USB 480 Power Protocol Analyzer

Easily monitor current and voltage levels on VBUS as well as USB protocol traffic to debug your USB application using the Beagle USB 480 Power Protocol Analyzer.

 

 

A2B Bus Monitor

The A2B® Bus Monitor is the first tool of it's kind - It enables you to watch A2B traffic, including the embedded I2C and GPIO traffic, plus hear and isolate sound from an A2B system. In this video our CEO, Gil Ben-Dov describes the functionality of the A2B bus, and then does a 'live demonstration' of the bus monitor using Analog Devices dev kits and our own A2B bus monitor.

 

Weekly Fish Fry - Type-C or Not Type-C

Listen to this interview of Total Phase CEO, Gil Ben-Dov, by EE Journal's Amelia Dalton. They discuss the Advanced Cable Tester which continuity testing, DC resistance measurement for safe operation/reliability, and E-Marker verification on Type-C cables. 

 

 

Total Phase USB Power Delivery Analyzer - Intro thumbnail

Learn the 5 easy steps to set up your USB Power Delivery Analyzer. The USB Power Delivery Analyzer connects in-line between two USB Type-C products, and passively captures all communication between them, on both the CC1 and CC2 signals.

 

 

Total Phase Overview - thumbnail

With an emphasis on connected devices, engineers are tasked with getting their devices online as quickly as possible. What if you could take an existing system, previously not IOT capable, and get it connected without having to do a redesign? Using Total Phase’s traditional development tools, such as protocol analyzers and host adapters you can collect and analyze data from embedded systems for the purpose of debugging and development. Now, take the same concept and move it to the Internet of Things. Learn how… 


Promira Serial Platform Overview

Learn about the Promira Serial Platform and it's robust features. The Promira platform is a versatile I2C and SPI host adapter with field upgradable capabilities for high performance programming and emulation.

 

 

Beagle USB 5000 v2 Analyzer

 

Learn how to create a multi-state complex match, trigger a USB capture, and view pre-trigger all USB data with the Beagle USB 5000 v2 SuperSpeed Protocol Analyzer.

 

Watch this step-by-step demonstration and learn how to set a multi-state USB 2.0 complex match and trigger an external output with the Beagle USB 5000 SuperSpeed Protocol Analyzer.

 

Watch this short demonstration on how to use the Komodo CAN Duo Interface and the Data Center Software to monitor and analyze CAN data in real time.

 

Learn how to capture and debug USB 3.0 traffic from scratch in 90 seconds using the Beagle USB 5000 SuperSpeed Protocol Analyzer and the Data Center Software.

 

Watch a live demonstration of the Beagle USB 480 Protocol Analyzer capturing and debugging data from Freescale's Kinetis K40 Microcontroller Tower system. This video also features the Aardvark I2C/SPI Host Adapter and the Beagle I2C/SPI Protocol Analyzer.

 

Watch this step-by-step demonstration and learn how to set a multi-state USB 2.0 complex trigger with the Beagle USB 5000 SuperSpeed Protocol Analyzer.

 

Quick introduction to Data Center Software's Packet Truncation and Configuration Management features, for use with the Beagle USB 5000 SuperSpeed Protocol Analyzer. See how packet truncation can allow for significantly longer captures and how saved USB configurations can be used to apply class-level decoding to captured data after a capture.

 

Monitor USB 3.0 traffic from Cypress' FX3 microcontroller, with integrated USB 3.0, using the Beagle USB 5000 v2 SuperSpeed Protocol Analyzer. The Beagle USB 5000 analyzer is a fast and efficient USB 3.0 protocol analyzer capable of real-time display, search, and filter.

 

Watch this video for an introduction to the Capture Control feature of the Data Center Software used with the Beagle USB 5000 SuperSpeed Protocol Analyzer. See how you can quickly manage a USB 3.0 capture with a click of a button and get instant visual feedback about the amount of buffer available and how much of the capture has been downloaded.

 

In this video, we provide a brief introduction to USB 3.0 new Link Training Status State Machine. We'll show how the LTSSM View in the Data Center Software provides an easy way to understand the new link states as they occur on the bus and give a quick tutorial on how to use Data Center software's controls to take full advantage of these premium features.

 

The Komodo CAN Duo Interface is Total Phase's powerful two-channel CAN adapter and analyzer. Watch as this all-in-one tool is used to simultaneously interact, monitor, and transmit CAN data to the CAN/I2C Activity Board Pro using the Komodo GUI Software.

 

 

This video provides an overview of the CAN protocol and introduces some of the key features of the Komodo CAN Duo Interface, a two-channel USB-to-CAN adapter and bus monitor.

 

 

 

 

This video shows how the bus tree feature in the Data Center software can help filter data from devices under test, and provide important descriptor information about those devices.

 

 

This video shows the new real-time, USB class-level decoding feature in the Data Center Software for the Beagle USB 480 Protocol Analyzer. Users can see decoded HID, Mass Storage, Hub, and Audio Class transactions as the data is captured on the bus.

 

 

The Cheetah SPI Host Adapter is used to program a 4 MB SPI Serial Flash memory chip quickly and easily through the free Flash Center Software.

 

  

A video overview of how to quickly capture, display, filter, and search high-speed USB traffic with the LiveDisplay™, LiveFilter™, and LiveSearch™ features of the Data Center 3.0 Software.