Promira Serial Platform
$900
Part Number: TP500110
Availability: In-Stock
The Promira® Serial Platform is our most advanced all-in-one serial device, capable of emulating I2C and SPI master/slave devices as well as performing I2C, SPI, & eSPI protocol analysis. It features integrated level shifting (for active use‡), increased target power, and High-speed USB and Ethernet connectivity. Engineers can use this versatile tool for a wide range of development and debugging tasks, including High-speed Flash/EEPROM programming, I2C/SPI system emulation and testing, custom scripting with advanced command queuing, and real-time protocol capture and analysis.
‡Coming soon to Analysis Applications. If you have an immediate need to perform sniffing at lower voltages, please contact sales at sales@totalphase.com for more information.
Receive 15% off any cable and 20% off any board with purchase of select devices. Discount applied at checkout.
Key Features
†Dependent on the application and application level
‡Available for Active use, coming soon to Analysis Applications
Applications
I2C Active - I2C programming speeds are twice as fast as the Aardvark I2C/SPI Host Adapter.
The Promira platform equipped with the I2C Active applications provides high speed I2C programming,
high performance debugging, and superior emulation for your I2C protocol needs.
I2C Analysis - Capture, decode, and troubleshoot I2C communication, gaining insight into data packets, timing, and protocol errors. The Promira platform equipped with the I2C Analysis Application enables I2C sniffing with LiveFilter and LiveSearch technologies in our award-winning Data Center Software.
SPI Active - SPI programming speeds are over eight times faster than the
Aardvark I2C/SPI Host Adapter. The Promira platform equipped with the SPI Active applications provides fast
programming, ultra-high performance debugging, and superior emulation for your SPI protocol needs.
SPI Analysis - Capture, decode, and troubleshoot SPI communication at twice the speed of the Beagle I2C/SPI Protocol Analyzer, gaining insight into data packets, timing, chip select activity, and protocol errors. The Promira platform equipped with the SPI Analysis Applications enables SPI sniffing with LiveFilter and LiveSearch technologies in our award-winning Data Center Software.
eSPI Analysis - Monitor eSPI communication between a master and slave across
data lines, supporting 5 channels (peripheral, virtual wire, OOB, Flash, Independent), 2 alert lines, 2 reset lines and more.
The eSPI Active Example files also show you how to use your SPI Active licensed Promira Serial Platform
to simulate a master for the eSPI protocol.
Tech Specs
Bit Rate (Active)
- I2C Master/Slave: 1 kHz – 3.4 MHz
- SPI Master: 31 kHz – 80 MHz
- SPI Slave: 31 kHz – 20 MHz
- eSPI Master/Slave: 66 MHz
Bit Rate (Analysis)
- I2C Analysis: Up to 5 MHz
- SPI Analysis: Up to 40 MHz
- eSPI Analysis: Up to 66 MHz
Target Bus Interface
- I2C Master/Slave/Analyzer
- SPI Master/Slave/Analyzer
- eSPI Analyzer/Simulator Examples
- Up to 16 GPIO pins
- Up to 8 slave selects
Host Bus Interface
- USB 2.0 Micro-B receptacle
- 10/100/1000 Ethernet receptacle
DC Characteristics
- Target Power: 5 V/3.3 V, 100 mA max
- I/O Power: 0.9 V – 3.45 V, 100 mA max‡
- I2C/SPI/GPIO Signal: 0.9 V – 3.45 V, 10 mA max‡
- eSPI Signal and DIO: 1.8 V
‡Available for Active use, coming soon to Analysis Applications
Operating Temperature
- 10 to 35 degrees C (50 to 95 degrees F)
Hardware
- Promira Serial Platform
- 34-Pin: 34-Pin Header Cable - 100 mm
- 34-Pin: 10-Pin Header Cable
- 3 ft USB Standard-A to Micro-B Cable
- One Year Warranty
Minimum Hardware Requirements
- Intel or AMD processor operating at 2 GHz or faster
- 1 GB physical RAM (32-bit) or 2 GB RAM (64-bit)
- 2 GB or more available hard disk space
- Full-speed USB port
- VGA capable of 1024-x768 or higher screen resolution
- Internet access is helpful
PC Requirements & Supported Operating Systems
- Windows: 10, 11 and later
- Linux: Red Hat, SuSE, Ubuntu, Fedora
- macOS: 13 and later
Note: Future versions of the Promira Firmware (after v2.00) will not be compatible with API versions older than v1.60. We encourage all customers using the API to upgrade to the latest API to maintain compatibility with future firmware releases.
Dimensions and Weight
- (W x D x L) 77.5 mm x 29.2 mm x 115.6 mm (3.05 in. x 1.15 in. x 4.55 in.)
- 153 g (0.34 lbs)
Quality
- RoHS
- One Year Warranty
- Manufacturing
- ISO 9001
- ISO 13485
- AS9100C
- ITAR
- Made in USA: Tariff-free, fast shipping, and reliable availability.
Resources
10 Reasons Why the Promira Serial Platform is an Essential Tool
Batch Scripting with the Promira Serial Platform
Promira Serial Platform Unboxing and Quick Start
Related Products
Reviews
Gary
Promira Host Adapter
2022-07-08
Jaroslaw L.
Easy to setup and use, excellent results
2019-07-10
David S.
Great for QC and development
2018-12-17
Jesus O.
Quick tool with powerful features.
2016-09-21
Taylor N.
Happy Aardvark and Promira platform user
2016-06-14
M B.
Just what I needed.
2016-06-14
AJ H.
Great Tool
2016-06-14
tshaffer
Great job... Very nice tool.
2016-06-14
KATHLEEN M.
great service and timely delivery
2016-04-13