Secure Your A2B Adapter Board in an A2B Adapter Board Enclosure

With the A2B Adapter Board, you have the configurable device with two independent AD2425-based A2B node for monitoring or interacting with A2B systems. How about securing and protecting the board in the working environment? No problem – we also provide the A2B Adapter Board Enclosure.

A2B Adabler Board Enclosure assemblyYou probably have the Promira Serial Platform and the A2B Bus Monitor - Level 1 Application, and the A2B Bus Monitor User Manual. Here are the instructions for the A2B board enclosure.

Instructions for Assembling the A2B Adapter Board Enclosure With the A2B Adapter Board

Here’s what you get with the A2B adapter board kit:

  • A2B Board Enclosure
  • 4 screws

The tools you will need:

  • Pliers
  • Screwdriver


Prepare the A2B board for assembly:

  1. Hold the A2B Adapter Board upright
  2. Using the pliers, gently break off the tab on each corner.
Remove corner tabs from A2B Adapter Board
The Adapter Board Enclosure comes in 2 parts: top cover and bottom plate.The picture shows how to align the board with the enclosure. It also shows that the tabs of the A2B Board were removed.  Align A2B board to enclosure
Secure the board to the bottom plate:

  1. Align the four screw holes on the corners of the plate with the holes on the A2B Board.
  2. Using the four provided screws, securely screw the board in place.


 Secure A2B board to enclosure base plate
Secure the cover to the bottom plate:

  1. Align the openings of the top cover with the ports on the board.
  2. Place the top cover of the enclosure onto the bottom plate.
  3. Make sure the ports are visible through the openings of the enclosure.



 A2B Enclosure Completed


 Here are resources that you may find helpful:


More questions? Need more details? Feel free to contact us at You can also request a demo:

Request a Demo