Features

The 10-Pin Grabber Clip Split Cable has a 10-pin box header that attaches to the ribbon cable. Each individual lead has a different color and is labeled with the pin name so that they are easy to identify.

Each pin has a grabber clip at the end with the following dimensions. The entire clip is nominally 44mm long. The cap body width is 2.54mm wide and roughly 21.5mm long. The hook of the grabber clip is is 0.51mm wide with a maximum opening of 3.18mm.

The connector is a standard 5x2 0.100" (2.54mm) pitch IDC type keyed box connector. Each individual lead is terminated with a single pin crimp connector with the same 0.100" (2.54mm) pitch. The cable is only 5" (12.7cm) long to minimize signal degradation.

Universal Uses

The 10-Pin Grabber Clip Split Cable is an incredibly useful tool that will save you from having to create or purchase adapter boards for your 10-pin ribbon cable. Although it is labeled with the Aardvark I2C/SPI Host Adapter and Beagle I2C/SPI Protocol Analyzer specific pinout, this split cable is universally adaptable to a variety of applications.

This split cable will connect to any standard 0.100" (2.54mm) pitch 10-pin keyed female IDC-type connector.

This price is discounted to $60.00 with an accompanying purchase of any of the following products: I2C Development Kit, SPI Development Kit, Flash Programming Kit, EEPROM Programming Kit, Aardvark I2C/SPI Host Adapter, Beagle I2C/SPI Protocol Analyzer, Cheetah SPI Host Adapter.

For a customized quote, please use our automated quote system.

Total Phase reserves the right to change the price without notice.

Please note that the price does not include sales tax, importation tariffs, duties, and other taxes. The customer is solely responsible for paying these fees. Your local distributor's price may differ from the suggested retail price because of importation taxes and fees.