Features
- Sniffing Power Delivery (PD) traffic on both Control Channel Lines (CC1/CC2)
- Message decoding, including power negotiation, alternate mode negotiation, VDM data display, etc.
- Capture and display PD 3.0 Extended Messages
- Decode DisplayPort VDMs
- Transparent interposing on a USB Type-C connection
 |
| Figure 1: Data Center Software showing captured data |
What is Included?
- USB Power Delivery Analyzer
- (1) 6 foot USB A to USB Micro-B cable
- (1) 6 inch Micro USB OTG Adaptor (Micro B male right-angle to Type A female)
- (1) 3 foot USB 2.0 Cable (Type A male to Type A male)
Software (downloadable from website)
- Data Center Software (Windows, Linux, and Mac OS X)
USB Pass Through:
- SuperSpeedPlus Generation 2, 10 Gbps
- SuperSpeed Generation 1, 5 Gbps
- Hi-Speed, 480 Mbps
- Full Speed, 12 Mbps
- Low Speed, 1.5 Mbps
VBus support (maximum):
- 20 volts, 3 amps
Target Ports:
- 1 x USB Type-C receptacle
- 1 x USB Type-C plug
Analysis Port (connects to PC):
- USB 2.0 Micro B receptacle
- Analyzer is bus-powered
Quality:
- RoHS
- Six month warranty
- Manufacturing: ISO9001, ISO 13485, AS9100C, ITAR
- W x D x L: 25.4 mm x 38.1 mm x 6.4 mm
(1.00 in. x 1.50 in. x 0.25 in.)
Weight:
- 42 g (1.5 oz)
Operating Temperature:
- 10º – 35º C (50º – 95º F)
General Requirements
| Available Software | Required Software |
| TP201110: Data Center Software | TP207910: USB Power Delivery Analyzer Firmware Update Utility |
| TP200810: USB Power Delivery Analyzer Software API | TP207010: USB Drivers - Windows |
| TP207210: USB Drivers - Linux | |
| Mac OS X (no drivers required) |
Supported Operating Systems (32-bit and 64-bit):
- Windows: 7, 8, 8.1, 10
- Linux: Ubuntu, Fedora, SuSE, Red Hat
- Mac OS X 10.7-10.11
Minimum Hardware Requirements:
- Intel or AMD processor operating at 2 gigahertz (GHz) or faster
- 1 gigabyte (GB) physical RAM (32-bit) or 2 GB RAM (64-bit)
- 2 GB or more available hard disk space
- Hi-speed USB port
- VGA capable of 1024x768 or higher screen resolution
- Internet access is helpful
