I2C SPI USB CAN eSPI Cable Testing View All Quick Start Guides User Manuals Software Downloads Knowledge Base Videos Case Studies App Notes White Papers Sales Support How to Order
Products Blog Sales Support Contact Search
I2C/SPI Product Guide

Not sure which tool is right for you? The following table breaks down the key features for our I2C/SPI Total Phase products. Detailed technical information for all these devices can be found in their respective datasheets. If you need assistance choosing the right I2C or SPI host adapter, please review our article, Choosing the Right Total Phase Host Adapter.

Aardvark I2C/SPI Host Adapter
Cheetah SPI Host Adapter
Promira Serial Platform
Beagle I2C/SPI Protocol Analyzer
Part Number
TP240141 TP280121 TP500110 TP320121
Datasheet
Datasheet Datasheet Datasheet Datasheet
I2C Master
Up to 800 kHz 1 Up to 3.4 MHz
I2C Slave
Up to 800 kHz 1 Up to 3.4 MHz
SPI Master
Up to 8 MHz 2 Up to 40 MHz+ 3 Up to 80 MHz
SPI Slave
Up to 4 MHz 2 Up to 20 MHz
I2C Analyzer
Up to 5 MHz Up to 4 MHz
SPI Analyzer
Up to 40 MHz Up to 24 MHz 4
GPIO
Up to 6 Up to 16
Slave Select
1 Up to 3 Up to 8 5
Voltage Level Shifting
Accessory Board Accessory Board Built-in 6 Accessory Board
Single/Dual/Quad SPI
Single SPI Single SPI Single/Dual/Quad SPI 5
Gigabit Ethernet Connectivity
USB Bus Powered Device
Full-Speed High-Speed High-Speed High-Speed
Windows, Linux, macOS Support
Software GUIs
Royalty-Free APIs
1 Actual system bus speed may vary as a function of capacitance.
2 The quoted values are intra-byte speeds. Please refer to the datasheet for timing restrictions.
3 Customers have successfully over-clocked the Cheetah SPI adapter to 50 MHz.
4 Actual SPI capture performance is dependent on CPU speed and SPI bus throughput. 24 MHz SPI capture has been tested for typical applications (e.g., captures of a few hundred SPI packets). Depending on user configuration, the maximum achievable capture throughput for continuous streaming applications may be less than 24 MHz.
5 Refers to SPI Active Mode, not SPI Analysis.
6 Available for Active use, coming soon to Analysis Applications.