-
-->
Image by Gordon Johnson from Pixabay
Question from the Customer:
I am looking at your products. Can your Aardvark I2C/SPI Host Adapter work with MCTP devices?
Response from Technical Support:
Thanks for your question! The answer is yes. MCTP is a layer on top of SMBus, a two-wir...
-
-->
[caption id="attachment_14453" align="aligncenter" width="600"] Image by ThisIsEngineering via Pexels[/caption]
Question from the Customer:
I am currently using the Cheetah SPI Host Adapter as a master device and another device as a slave, which is controlled through SPI. When I use ...
-
-->
Central processing units, or CPUs, are used in the technology we use every day, from smartphones, to laptop computers, to wearables. These processors allow these devices to carry out instructions and tasks in order for it to perform its designated function. While there are different types...
-
-->
The Data Center Software is one of Total Phase’s most well-known test and measurement tools. With its ability to display detailed, real-time data as it takes place on the bus, it is a must-have tool for debugging embedded systems. In the Data Center Software series, we dive into specific ...
-
-->
Question from the Customer:
I would like to periodically log data from a measurement device which communicates with the host computer via full-speed USB. The measurement uses bulk transfer to send the data in real time. I do not have access to the host computer and am thinking of using ...
-
-->
The Data Center Software is Total Phase’s free bus monitoring software that allows users to interface with Total Phase protocol analyzers supporting I2C, SPI, USB, CAN, and eSPI protocols. These analyzers include the Beagle I2C/SPI Protocol Analyzer, the line of Beagle USB Protocol Analyze...
-
-->
Introduction of I2C
I2C, or “Inter-Integrated Circuit,” has become a de facto standard in the embedded systems industry since its inception in the 1980s by Philips. As the rapid adoption of electronic devices became more mainstream in the late 1900s and early 2000s, a need arose to make dev...
-
-->
Image by Gerd Altmann from Pixabay
Question from the Customer:
I am using the Beagle I2C/SPI Protocol Analyzer and Data Center Software with an product in development. The data transfers go well until the last byte. My assumption is the SPI slave signal line is going high too soon, giv...
-
-->
[caption id="attachment_14600" align="aligncenter" width="600"] Photo by Mikhail Nilov via Pexels[/caption]
Question from the Customer:
I am currently working on a project that uses a Nordic nRF9160DK board to control an SPI CrystalFontz display. All too often, I see corrupted scree...
-
-->
Photo by cottonbro via Pexels
Question from the Customer:
I have a manufacturing problem to take care of and it looks like the Beagle USB 5000 v2 SuperSpeed Protocol Analyzer - Standard Edition could do the job. The product I am working on is a measuring device that transfers data to ...