-
Question from the Customer:
I have a project where I need to compare the temperatures of two separate devices in the same environment. I’m looking to use the Beagle I2C/SPI Protocol Analyzer to collect and plot the data. How can I best capture and view the data?
Response from Technical...
-
Question from the Customer:
I’m using the Beagle USB 480 Power Protocol Analyzer - Standard Edition to monitor data between devices and the host computer. Looking at the data transactions in the block view of the Data Center Software, I see “IN” and “OUT” transaction types – does that tell ...
-
Question from the Customer:
In the past, I have had great success using the Beagle USB 480 Protocol Analyzer with Data Center Software to collect Ethernet Frames over a USB 2.0 link. Now I am starting a new project where I’m adding Wireshark to the mix. How can I export the data captured i...
-
-->
Question from the Customer:
I’m monitoring a USB 3.0 bus with the Beagle USB 5000 v2 SuperSpeed Protocol Analyzer. By default, the Beagle USB 5000 v2 analyzer's receiver termination detection system is set to auto-detect. How can I control the detection system manually?
Response fro...
-
Question from the Customer:
I’ve been using your Beagle I2C/SPI Protocol Analyzer, and now I’m trying out your Aardvark I2C/SPI Host Adapter. Using the I2C/SPI Activity Board, I want to do something simple like turn on an LED. What steps do I need to take to perform this action?
Respo...
-
-->
Question from the Customer:
I’m using the Beagle I2C/SPI Protocol Analyzer and need to save long message logs for analysis, a minimum of 24 hours. The buffer receives 12.5MB of data per minute. To log 24 hours nonstop, I would be storing 22.5GB of previous data in volatile RAM. I woul...
-
-->
Question from the Customer:
I’m using the Beagle USB 5000 v2 SuperSpeed Protocol Analyzer - Standard Edition to monitor a Blu-ray recorder with an external USB-HDD. I’d like to run the device using command line. This is all very new to me – can you send me an example of batch script? ...
-
-->
Question from the Customer:
My consulting firm just got a large contract. We’ll be testing and verifying a setup for high volume sales for airport stakeholders. The system consists of a cash register, a tablet, and printer, and connectivity to the server farm. To better monitor trans...
-
-->
Question from the Customer:
I need a protocol analyzer to capture MDIO bus transactions. I have a Total Phase 10-Pin Grabber Split Cable on hand, but I don’t see any markings for MDC and MDIO signals. Which pins should I use, and which Beagle protocol analyzer do you recommend?
Resp...
-
-->
Question from the Customer:
I am interested in the Beagle USB protocol analyzers, and I have very specific questions about the Data Center Software. What searching or filtering options do you offer?
The exact scenario is that I am looking to find and ideally exclude particular packe...