-
Question from the Customer:
I am using the Aardvark I2C/SPI Host Adapter and I am trying to connect it to the SMBus compatible NL2020 Standard Smart Li Ion Battery Pack. Unfortunately, I’m not getting an acknowledgement from the battery after executing a read/write command. Here are the detai...
-
Question from the Customer:
We are going to test new software that interacts with several low-speed serial devices over the USB bus. The hardware is offsite, not at our local office. Is it possible to capture USB data streams with the Beagle 12 USB Protocol Analyzer from a remote location and ...
-
Total Phase tools are well-known for analysis, trouble-shooting and debugging, as well as programming and testing devices on the production floors – do you know how well our tools work for prototyping and debugging new design concepts? Here is an example of how two easy-to-use tools; the Aardvark...
-
Question from the Customer:
I am new to USB and just purchased my first Beagle USB Protocol Analyzer. The product manual does a splendid job explaining how USB works and the Data Center Software User Manual illustrates how easy it is to start a capture.
What I am looking for is a simple, s...
-
Introduction
USB is everywhere. The familiar ports can be found in wide variety of applications: from consumer devices like smartphones and laptops, to infotainment systems in newer automobiles, and of course, embedded systems.
With its growing presence in electronic devices, the popularity...
-
Question from the Customer:
I am using the Beagle USB 5000 v2 SuperSpeed Protocol Analyzer to analyze a UVC (USB Video Class) device.
I don't want to capture the UVC frame data - I only want to capture the LTSSM (Link Training Status State Machine) transitions. How can I filter that data?...
-
It’s always exciting to learn something new – especially when it’s about use cases for Total Phase tools. As someone who is relatively new to the company, I’m interested in hearing how our customers use our tools in their line of work. There is no better way to learn from customers than to meet ...
-
Question from the Customer:
It appears that the default receiver termination detection system of the Beagle USB 5000 v2 SuperSpeed Protocol Analyzer – Ultimate Edition is auto-detect. I’m testing and debugging a device on the USB 3.0 bus and want to control the receiver termination. Can I manu...
-
There was lots of activity at ARM TechCon 2015, in Santa Clara last week, with over 4,000 attendees, 7 tracks and 6 keynotes. This was Total Phase’s first time exhibiting at this conference and we truly enjoyed the experience.
Many of the new ARM designs support the CAN Bus and the USB Bus. A ...
-
Question from the Customer:
I am planning to buy your Beagle I2C/SPI Protocol Analyzer. In the Beagle Protocol Analyzer User Manual, the input high voltage signal level is noted as 3.3V with +/-10% tolerance. However, on the target board, the high signal level is limited to +2.7V (the MCU is p...