-
Hello from Total Phase! We are currently live on the show floor at the DesignCON 2013 Expo in Santa Clara, CA. Located at Booth 320, attendees experienced a live demonstration of the award-winning suite of embedded systems development tools, including the Beagle USB 5000 v2 SuperSpeed Protocol An...
-
Q: I'm looking for an SPI bus monitoring solution and I have a specific hardware set up. My hardware set up requires the monitoring of an SPI shared bus with 2 chip select signals.
Does Total Phase provide any tools for SPI testing and/or monitoring an SPI bus? Furthermore, do you have any sug...
-
Q: I was looking for an I2C development tool to program an EEPROM chip and monitor the data as I program the EEPROM. Looking at your website, I found two I2C tools - the Aardvark I2C/SPI Host Adapter and the Beagle I2C/SPI Protocol Analyzer. Can you tell me what the difference is between the Aard...
-
Q: I'm working with the Aardvark I2C/SPI Host Adapter, and I would like to use the Aardvark host adapter with a 1.8 volt slave device. My I2C device lines are 3.3 volt tolerant. I tried to disable your pull-ups and use an external pull-up resistor to 3.3 volts, but this doesn't seem to work. Can ...
-
Total Phase has always provided the most comprehensive debugging and development solution across the USB, I2C, SPI, and CAN protocols featuring cross-platform support on Windows, Linux, and Mac OS X. We are proud to feature cross-platform support for all of our software, APIs, and drivers, and st...
-
This week, the Total Phase sales team packed their bags and traversed across the world to Nuremberg, Germany for Embedded World! Embedded World is held this year from Tuesday, February 26 to Thursday, February 28. Attendees had the opportunity to drop by our Total Phase booth and experience a liv...
-
Q: I am interested in sniffing USB traffic on my USB 2.0 device with the Beagle USB 480 Protocol Analyzer. I have a few questions about the capabilities of the Data Center Software that can be used with the Beagle USB 480 protocol analyzer. First, when monitoring data, does the transaction log sh...
-
Q: I recently bought a Beagle USB 480 Protocol Analyzer and have started using it with the Data Center Software to monitor the CDC-ECM and CDC-NCM classes on the USB 2.0 link. Now, we would like to integrate this USB bus monitor into a custom application. Do you have any software development kits...
-
-->
Q: I am using the Beagle I2C/SPI Protocol Analyzer with the Data Center Software to monitor a particular coming across the I2C bus. I would like to monitor the latest Read transactions that occur after a Write transaction on the I2C bus. Right now, I'm manually scrolling down to see the la...
-
-->
Q: I recently came across two of your products – the Cheetah SPI Host Adapter and the Aardvark I2C/SPI Host Adapter. I am interested in programming SPI data, but I'm not sure which SPI host adapter I should use. Can either of these host adapters support 16-bit, 32-bit, or larger continuous...