Question from the Customer:
I am working on a new project and after reading your article Did You Know That a Beagle Protocol Analyzer Can Be Integrated with Wireshark or ARM-based Hosts?, it looks like the Beagle I2C/SPI Protocol Analyzer could do the job. To be sure this is the right tool, I have some questions:
SPI, Serial Peripheral Interface bus, is a synchronous serial data protocol that was developed by Motorola in the 1970s. The protocol was developed to replace parallel buses and provide high speed data transfers over short distances.
It is a full-duplex protocol that requires four signals: clock, master out/s...
Question from the Customer:
I am using the new Advanced Cable Tester v2 to test our USB 3.2 Standard-A to Type-C cables and am running into some problems after creating a custom profile. So far, I have not been able to modify the setting for the ground resistance to fit the specification. Here is where the test report shows failure:...
The Internet of Things (IoT) refers to the billions of devices around the world that are now connected to the internet and capable of uploading sensor data and other information through wireless networks and into the cloud. In addition to residential applications like smart home security systems and washing machines, IoT devices have ...
Question from the Customer:
I am using the Aardvark I2C/SPI Host Adapter in I2C mode to perform a Master Register Read. Normally, I can do that with Aardvark Software API, but this time I’m using LabVIEW and it’s not working for me. How do I successfully implement I2C Master Register Read with LabVIEW?
Response from Technical Su...
The Control Center Serial Software allows users to easily control their I2C or SPI devices, including multi I/O SPI devices. In this blog, we’ll cover how to use the Multi I/O SPI Master Mode function to easily configure your master device to support dual and quad SPI modes.
The Standard SPI protocol operat...
