Reading Device ID from SPI Flash Using Aardvark Adapter and Control Center

Today's blog is based on a recent addition to our Knowledge Base Article: Reading Device ID from SPI Flash Using Aardvark Adapter and Control Center.

Introduction

The Aardvark adapter is frequently used for Programming and reading SPI memory devices. There are several ways to do this with the Aardvark adapter, including using Control Center Soft...

Reading Device ID from SPI Flash Using the Cheetah Host Adapter

Starting with the recent Design West Conference, we've had a focus on SPI programming over the last several weeks.  We recently added support for all Spansion Serial NOR Flash Memory and the latest Micron memory as well - The new version of Flash Center Software will be released on our website this coming Monday, May 20th.

Today's blog post com...

Support Question of the Week - USB Power Management

Q:  I have a Beagle USB 480 Protocol Analyzer. I need to know if it does support LPM-L1 and, if it does not, which product of yours would support it.

A: LPM-L1 is one level (LPM-L2 is the other) of the power management aspect of the USB 2.0 specification.  We do decode LPM packets and will show the suspend/resume events for USB 2.  The real-t...

Support Question of the Week - MDIO

Normally we confine this blog to SPI/I2C/USB and CAN questions, but once in a while we're asked questions about other protocols.  This week, one customer wanted to know about MDIO.

Q:  Do any of your products support MDIO? Host Adapter? Analyzer?

Beagle I2C/SPI Protocol Analyzer The Beagle I2C/SPI Protocol Analyzer non-intrusively monitors I2C, SPI and MDIO data in real time...