The Beagle™ USB 480 Protocol Analyzer is a low cost, non-intrusive High-speed USB 2.0 bus monitor that now includes real-time USB class-level decoding.
The Beagle analyzer is capable of capturing, displaying, and filtering high-speed USB bus-states and traffic in real-time with timing at 16.7 ns resolution and comes complete with software and royalty-free API. Thanks to an on-board 64 MB buffer, sustained bursts of 480 Mbps traffic can be captured with no loss of data.
Not sure which product is right for your needs? The Product Selector Guide provides a brief summary table of key features for each Total Phase product.
Detailed technical information can be found in the datasheet.
Comparison Chart: See how the Beagle USB 480 Protocol Analyzer compares to other USB analyzers on the market.
Every unit comes complete with the following items:
The Beagle USB 480 Protocol Analyzer has two different capture modes: real-time capture and delayed-download capture. The real-time capture mode allows developers to see all the high-speed data over USB as it happens. As the data is streamed in real-time, the capture size is only limited by the amount of RAM available on the analysis computer.
The delayed-download capture can be very useful in certain situations, such as when the Beagle USB 480 Protocol Analyzer is on the same high-speed bus as the target device. In these configurations, the Beagle analyzer is able to consume minimal USB bandwidth so that it does not obscure problems that occur only when the target is operating at the full USB bandwidth.
Real-time USB class-level decoding in the Data Center Software is available with the Beagle USB 480 Protocol Analyzer
The Beagle USB 480 Protocol Analyzer can capture and display the K and J chirp patterns used in high-speed speed negotiations.
The Beagle USB 480 Protocol Analyzer is able to robustly and reliably detect the correct speed of the USB data it is monitoring.
A hardware input filter is available to suppress packets in order to reduce the amount of data captured. The filter can remove empty packet pairs such as IN/NAK and PING/NAK pairs.
To assist in identifying problems, the Beagle USB 480 Protocol Analyzer provides four digital inputs that allow users to capture additional hardware events in-line with the captured USB data from the target device.
Four digital outputs are available to provide for synchronization of the Beagle analyzer with scopes and logic analyzers. These digital outputs are able to match patterns in the captured data as well as idle bus states.
The Beagle USB 480 Protocol Analyzer can intelligently detect suspend and resume events as well as unexpected signals on the bus.
Get packet-level timing with 16.67 ns resolution.
The Beagle USB 480 Protocol Analyzer comes complete with software for $1200. Additional discounts are available for larger volumes. There are no additional yearly support contracts and no fees for software updates.
This low price means that it is immediately affordable for a company to provide every developer with their own analyzer.
The benefits of the Beagle analyzer's low cost are:
The Beagle monitor is completely field-upgradable via USB. Total Phase is committed to improving the Beagle USB analyzer and making these improvements available to our customers free of charge. There are no yearly support contracts and no software update fees.
Updates will be available for download from the Product Downloads section.
The Data Center Software is the free software that is included with the Beagle™ USB 480 Protocol Analyzer. Everyone is welcome to download this software from the Total Phase website to allow for easy collaboration through the sharing of capture data files.
Features include:
Learn more about the Data Center Software.
The full power of the Beagle analyzer is available for custom software applications through a free and royalty-free API. Developers have access to the same API used by the Data Center Software. Full functionality is available for automated test suites, production test fixtures, and more.
Learn more about Rosetta Language Bindings and the API.
The Beagle Protocol Analyzer was engineered from the very beginning to be a cross-platform device. The software and utilities for the Beagle Protocol Analyzer function on Windows, Linux and Mac OS X so that you can develop software for your preferred platform.
The software is officially supported on Windows XP (SP2 or later, 32-bit only), Windows Vista (32-bit and 64-bit), and Windows 7 (32-bit and 64-bit).
The software has been designed for Red Hat Enterprise Linux 4 and 5 with kernel 2.6. Customers have reported successful operation with SuSE and Ubuntu distributions. Please be aware that there may be significant differences and idiosyncracies in the way that different distributions of Linux operate. As such, Total Phase may not be able to support your particular distribution of Linux. Support will be offered on a case-by-case basis.
The software is supported on Intel versions of Mac OS X 10.5 Leopard and 10.6 Snow Leopard.
The graphical software is offered as a 32-bit or 64-bit application on Windows and Linux, and only as 32-bit application on Mac OS X. Separate 32-bit and 64-bit versions of the API libraries are provided for all platforms to allow custom applications to be built for either architecture.
You will never have to worry about being out of step with the latest software features. Software and firmware upgrades are always freely available in the Downloads section of this website.
| Part Number | Description | Quantity | Unit Price |
|---|---|---|---|
| TP320510 | Beagle USB 480 Protocol Analyzer - v1.00 | 1 | 1200.00 |
| 3 | 1100.00 | ||
| 5 | Call |
For a customized quote, please use our automated quote system.
For orders of 50 units or more, email us at Total Phase Sales.
Total Phase reserves the right to change the price without notice.
Please note that the price does not include sales tax, importation tariffs, duties, and other taxes. The customer is solely responsible for paying these fees. Your local distributor's price may differ from the suggested retail price because of importation taxes and fees.
Non-intrusive full-/low-speed USB bus monitor with real-time display, search, and filtering.
Provides grabber clips to help connect the digital IO interface of the Beagle USB 480 Protocol Analyzer to external logic.
Provides an additional USB 2.0 host controller for your desktop computer.
Connect USB devices with captive USB-A connectors quickly and easily to the Beagle USB Protocol Analyzers.
Mini USB adapter cables for the Beagle USB 480 Protocol Analyzer or the Beagle USB 12 Protocol Analyzer.
5 pack of 1 foot USB A-B cables
Display and filter USB, I2C, SPI, and MDIO data in real-time with this easy-to-use interface to the Beagle Protocol Analyzers.
|
[+]
USB Drivers (Windows)
V2.02
2009-11-18
|
|
USB drivers for the Aardvark I2C/SPI Host Adapter, Beagle Analyzers, and Cheetah Host Adapters. Ensure the drivers are installed before plugging in any Total Phase device. The Windows installer contains the 32-bit and 64-bit USB drivers. Refer to the device datasheet for more information regarding which versions of Windows are supported. Version 2.02 contains a minor update to the installer to support Windows 7, but uses the same USB drivers as version 2.00. |
|
[+]
USB Drivers (Linux)
V2.00
2008-07-18
|
|
USB drivers for the Aardvark I2C/SPI Host Adapter, Beagle Analyzers, and Cheetah Host Adapters. Ensure the drivers are installed before plugging in any Total Phase device. This package contains the configuration files for all Total Phase devices. Refer to README.txt and the datasheet for more details on how the Total Phase devices use the built-in USB drivers in Linux. |
|
[+]
Beagle Protocol Analyzer Datasheet
V3.09
2010-06-25
|
|
Complete datasheet for the Beagle analyzers, covering usage, programming, engineering notes. None |
|
[+]
Data Center Software
V4.30
2010-08-30
|
|
GUI Application for the Beagle analyzers Refer to the User's Manual for system requirements. |
|
[+]
Data Center Software User's Manual
V4.30
2010-08-30
|
|
User's manual for the Data Center Software None |
|
[+]
Beagle Software API and Shared Library
V3.09
2010-06-25
|
|
Rosetta Language Bindings - 32-bit and 64-bit Software API and Shared Library for C, C#, Python, .NET, VB.NET, and VB6 Please read the UPGRADE.txt in the package because some API calls have been changed. |
|
|
|
|
© 2010 Total Phase, Inc. All rights reserved. Terms of Use | Privacy Notice | Site Map |
HOME | PRODUCTS | SOLUTIONS | SALES | SUPPORT | BLOG | COMPANY | CONTACT |