Memory Programming
- Reading EDID data from DVI monitor EEPROM using Aardvark adapter and DVI DDC Breakout Cable
- Programming an I2C EEPROM Using Promira Serial Platform and Control Center Serial Command Line on Linux
- Programming an SPI EEPROM Using Promira Serial Platform and Control Center Serial Command Line on Linux
- Programming I2C EEPROM using Aardvark Adapter and Control Center Serial Batch Mode on Linux Ubuntu 14.04 64 bit
- Programming QSPI Flash Using the Promira Serial Platform and the Flash Center Software
- Programming a Dual SPI Flash Using the Promira Serial Platform and the Control Center Serial Software
Software API
- Sending I2C Messages Between Two Aardvark adapters Using Aardvark LabVIEW
- Sending SPI Messages Between Two Aardvark adapters Using Aardvark LabVIEW
- Using the Aardvark with Python on 64-bit Windows
- All this technical stuff is great, but where can I find some examples if I want to write some code quickly?
- Total Phase's device DLL philosophy is great, but where should I put the DLL/SO to make sure it is always found by my application?
- How To Use Total Phase Products With MATLAB
General Software
- Splitting a Data Center trace
- My Promira doesn't show up in Promira Utility/Control Center Serial Software on macOS
- Monitoring eSPI Messages Using Promira Platform and Data Center
- Monitoring Flash Drive Power Delivery Using USB Power Delivery Analyzer, Sigrok and PulseView
- Hub Latency Calculation using Beagle 5000 Analyzer
- Sending CAN Messages From Komodo Duo Interface Channel and Monitoring It With The Other Channel Using Komodo GUI and Data Center
General Hardware
- Manually updating firmware/license on your Advanced Cable Tester v2
- Sending a Packet with the USB Power Delivery Analyzer
- Voltage and Current Measurements with the USB PD Analyzer
- What possible bitrates do the Aardvark I2C/SPI Host Adapter support?
- Why am I seeing occasional bit corruptions when using the SPI slave functionality?
- Is the Aardvark I2C/SPI Host Adapter compatible with 5V I2C devices?
Drivers
- Driver Installer Stuck at: 'Removing phantom devices'
- What drivers are needed to have my Aardvark adapter, Beagle analyzer, Cheetah adapter, Komodo interface, or Promira Serial Platform recognized by my operating system?
- What interface do the Aardvark adapter, Beagle analyzer, Cheetah adapter, and Komodo interface use to communicate with the host PC?
- Intel EHCI Host Controller Issue
- Troubleshooting USB Driver Installation for Windows
- libusb compatibility on Linux
Serial Protocols
- CAN Background
- 7-bit, 8-bit, and 10-bit I2C Slave Addressing
- Differences between I2C and SMBus
- USB Background
- I2C Background
- SPI Background