Cheetah SPI Host Adapter

Cheetah SPI Host Adapter

Part Number: TP280121

Distribution: Physical Shipment

Availability: In-Stock

Price: $350.00
  • Buy 10 for $332.50 each and save 5%
  • Buy 25 for $315.00 each and save 10%
 

Receive 15% off any cable and 20% off any board with purchase of select devices. Discount applied at checkout.

The Cheetah™ SPI Host Adapter is a high-speed SPI adapter that is capable of communicating over SPI at up to 40+ MHz. The Cheetah adapter is specifically designed to communicate with high-speed, SPI-based flash memory. It is an ideal tool to develop, debug, and program SPI-based systems.

Not sure which product is right for your needs? The Product Selector Guide provides a summary table of key features for our I2C/SPI Total Phase products.

Detailed technical information about the Cheetah SPI Host Adapter can be found in the User Manual.

We also have a Quick Start Guide to help you get started.

You may also be interested in the following product(s)

Level Shifter Board

Level Shifter Board

Price: $120.00
10-Pin Split Cable

10-Pin Split Cable

Price: $30.00
High-Speed SPI Flash Demo Board

High-Speed SPI Flash Demo Board

Price: $60.00
Overview
  • High-Speed SPI Master signaling at up to 40+ MHz.
  • Transaction Queuing for Maximum Throughput
  • Fully Linux and Windows Compatible
  • Royalty-Free API
  • Low Cost
What is Included
High-Speed USB 2.0

The Cheetah adapter is a bus-powered, High-Speed USB 2.0 device. This provides two major benefits. As a high speed device, all the data captured by the Cheetah adapter are transferred to the test computer at 480 Mbps. As a bus-powered device, the Cheetah adapter does not require a power adapter. This makes the Cheetah adapter the ideal tool for engineers in the field. Just plug it into a High-Speed USB 2.0 port on your laptop and you are ready to go.

Low Cost

The Cheetah SPI Host Adapter comes complete with software for only $350 in single unit quantities. Additional discounts are available for larger volumes.

Future-Proof

The Cheetah adapter is completely field-upgradable via USB. Total Phase is committed to improving the Cheetah adapter and making these improvements available to our customers.

You will never have to worry about being out of step with the latest software features. Eligible Software and firmware upgrades are always freely available in the Downloads section of this website.

 
General Requirements
Available Software  Required Software
TP201310: Flash Center Software TP207010: USB Drivers - Windows   
TP201510: Control Center Serial Software TP207210: USB Drivers - Linux
TP202210: Cheetah LabVIEW Driver     Mac OS X (no drivers required)
TP200310: Cheetah Software API  

 




PC Requirements & Supported Operating Systems (32-bit and 64-bit)
•    Windows: 7, 8, 8.1, 10
•    Linux: Red Hat, SuSE, Ubuntu, Fedora
•    Mac OS X: 10.7-10.14

Minimum Hardware requirements
•    Intel or AMD processor operating at 2 gigahertz (GHz) or faster
•    1 gigabyte (GB) physical RAM (32-bit) or 2 GB RAM (64-bit)
•    2 GB or more available hard disk space
•    High-speed USB port
•    VGA capable of 1024x768 or higher screen resolution
•    Internet access is helpful

Cheetah SPI Host Adapter User Manual
Cheetah SPI Host Adapter Quick Start Guide

6-9 of 9

Page:
  1. 1
  2. 2
  1. cheetah Review by Shane A.
    Rating

    all went fine. (Posted on 11/2/17)

  2. Great Review by Nir K.
    Rating

    Great (Posted on 10/11/16)

  3. Cheetah SPI Host Adapter Review by Silvestre E.
    Rating

    We are working on a application to use with LabView. Do you have any VI example? (Posted on 6/29/15)

  4. Perfect for what I need Review by Hadleigh R.
    Rating

    I use it to rebuild Tera2 products. Works great. thanks (Posted on 12/8/14)

6-9 of 9

Page:
  1. 1
  2. 2

Overall Average Rating:
9 reviews

6-9 of 9

Page:
  1. 1
  2. 2
Shane A. Feb 41 2017 Feb 11 201721:00
  • more than 4 year(s)
  • Rating:
cheetah
all went fine.
0
0
Nir K. Nov 314 2016 Nov 10 201621:00
  • more than 5 year(s)
  • Rating:
Great
Great
0
0
Silvestre E. Jun 179 2015 Jun 29 201521:00
  • more than 6 year(s)
  • Rating:
Cheetah SPI Host Adapter
We are working on a application to use with LabView. Do you have any VI example?
0
0
Hadleigh R. Aug 223 2014 Aug 12 201420:00
  • more than 7 year(s)
  • Rating:
Perfect for what I need
I use it to rebuild Tera2 products. Works great. thanks
0
0

6-9 of 9

Page:
  1. 1
  2. 2
What kind of abuse are you reporting?
Please, wait...