Aardvark I2C/SPI Host Adapter

Aardvark I2C/SPI Host Adapter

Part Number: TP240141

Distribution: Physical Shipment

Availability: In-Stock

Price: $300.00
  • Buy 10 for $285.00 each and save 5%
  • Buy 25 for $270.00 each and save 10%
 

Receive 15% off any cable and 20% off any board with purchase of select devices. Discount applied at checkout.

The Aardvark I2C/SPI Host Adapter is a fast and powerful I2C bus and SPI bus host adapter through USB. It allows a developer to interface a Windows, Linux, or Mac OS X PC via USB to a downstream embedded system environment and transfer serial messages using the I2C and SPI protocols.

Not sure which product is right for your needs? The Product Selector Guide provides a summary table of key features for our I2C/SPI Total Phase products.

Detailed technical information about the Aardvark I2C/SPI adapter can be found in the User Manual.

We also have a Quick Start Guide to help you get started.

You may also be interested in the following product(s)

Promira Serial Platform

Promira Serial Platform

From: $450.00

To: $5,950.00

I2C/SPI Activity Board

I2C/SPI Activity Board

Price: $60.00
Level Shifter Board

Level Shifter Board

Price: $120.00
10-Pin Split Cable

10-Pin Split Cable

Price: $30.00
Overview
  • I2C master and slave up to 800 kHz
  • I2C multi-master support
  • SPI master up to 8 MHz
  • SPI slave up to 4 MHz
  • GPIO with selectable pins

Actual system bus speed may vary as a function of capacitance.

What is Included
I2C
  • True 800 kbps performance over higher bandwidth USB versus slower RS-232.
  • Supports standard mode (100 kbps) and fast (400 kbps) mode as well as various speeds ranging from 1 kHz to 800 kHz.
  • Supports inter-bit and inter-byte clock stretching.
  • Supports multi-master.
  • Master transmit and receive.
  • Asynchronous slave transmit and receive.
  • Software configurable I2C pull-up resistors.
  • Software configurable target power pins to power downstream devices.
  • Repeated Start, 10-bit slave addressing, and Combined Format transactions.

The Aardvark I2C/SPI Host Adapter is compatible with:

  • Display Data Channel (DDC)
  • System Management Bus (SMBus)
  • Power Management Bus (PMBus)
  • Smart Battery Bus (SBBus)
  • Intelligent Platform Management Interface (IPMI)
  • Two-Wire Interface (TWI)

Learn more about I2C in the I2C Background Article.

Actual system bus speed may vary as a function of capacitance.

SPI
  • Operates in master or slave mode.
  • Up to 8 Mbps master signaling rate.
  • Up to 4 Mbps slave signaling rate.
  • Full duplex master transmit/receive.
  • Asynchronous slave transmit/receive.
  • Software configurable target power pins to power downstream devices.
  • Software configurable Slave Select (SS) polarity in master mode.

Learn more about SPI in the SPI Background article.

GPIO - General Purpose IO
  • I2C and SPI pins can be repurposed for more general use, allowing them to be used for custom signals on target systems.
  • GPIO functionality can also be combined with I2C or SPI to interact with your target system.
  • GPIO configuration is cached internally to preserve settings between operational modes.

Low Cost

The Aardvark adapter comes complete with a royalty-free API.

The low cost makes it affordable for a company to provide every developer with their own interface. The benefits of every developer having their own interface are:

  • Less time wasted because developers do not have to share tools or go to the lab to debug simple problems.
  • Less wasted time means higher productivity because developers can identify and fix problems quickly and easily with less down-time.
  • Higher productivity means shorter development cycles. Projects get done on time and on budget.

By saving just a few hours of engineering time, the Aardvark adapter will have paid for itself.

Future-Proof

The Aardvark adapter is completely field-upgradable via USB. Total Phase is committed to improving the Aardvark adapter and making these improvements available to our customers.

You will never have to worry about being out of step with the latest software features. Eligible Software and firmware upgrades are always freely available in the Downloads section of this website.

General Requirements
Available Software  Required Software
TP201010: Control Center Serial Software TP207010: USB Drivers - Windows   
TP201310: Flash Center Software TP207210: USB Drivers - Linux
TP202010: Aardvark LabVIEW Driver    Mac OS X (no drivers required)
TP200110: Aardvark Software API  

 




PC Requirements & Supported Operating Systems (32-bit and 64-bit)
•    Windows: 7, 8, 8.1, 10
•    Linux: Red Hat, SuSE, Ubuntu, Fedora
•    Mac OS X: 10.7-10.14

Minimum Hardware requirements
•    Intel or AMD processor operating at 2 gigahertz (GHz) or faster
•    1 gigabyte (GB) physical RAM (32-bit) or 2 GB RAM (64-bit)
•    2 GB or more available hard disk space
•    Full-speed USB port
•    VGA capable of 1024x768 or higher screen resolution
•    Internet access is helpful

Aardvark I2C/SPI Host Adapter User Manual
Aardvark I2C/SPI Host Adapter Quick Start Guide

31-35 of 74

  1. Great experience Review by Allen H.
    Rating

    Arrived on-time and item was just what I wanted. I recommend them and will use for future purchases. AW in Seattle (Posted on 8/28/18)

  2. Helpful and attentive to my needs. Review by Luis C.
    Rating

    Made changes to my order quickly and make sure that there were no errors in the charges. Delivered items as promised. it was a little pricy though. Thank you for a good service. (Posted on 7/12/18)

  3. Everything was perfect thank you Review by Stephen
    Rating

    Everything was perfect thank you (Posted on 6/26/18)

  4. Tech supports is great! Review by Ph
    Rating

    This review is on Aardvark software API. I am using the API to develop a program on I2C access. During my first try it's not working as DLL calls did not match its USB driver. Sent a compliant review then during the same day in the evening I received an email from tech support. The next day, today I gave it another shot based on the given info and it went thru.
    I use Aardvark and Beagle on I2C coding. The both work really well. Very appreciate TotalPhase's customer support. (Posted on 5/2/18)

  5. well received the item Review by אמיל
    Rating

    well received the item (Posted on 4/25/18)

31-35 of 74


Overall Average Rating:
74 reviews

31-35 of 74

Allen H. Aug 239 2018 Aug 28 201821:00
  • more than 3 year(s)
  • Rating:
Great experience
Arrived on-time and item was just what I wanted. I recommend them and will use for future purchases. AW in Seattle
0
0
Luis C. Dec 340 2018 Dec 07 201821:00
  • more than 3 year(s)
  • Rating:
Helpful and attentive to my needs.
Made changes to my order quickly and make sure that there were no errors in the charges. Delivered items as promised. it was a little pricy though. Thank you for a good service.
0
0
Stephen Jun 176 2018 Jun 26 201821:00
  • more than 3 year(s)
  • Rating:
Everything was perfect thank you
Everything was perfect thank you
0
0
Ph Feb 35 2018 Feb 05 201821:00
  • Rating:
Tech supports is great!
This review is on Aardvark software API. I am using the API to develop a program on I2C access. During my first try it's not working as DLL calls did not match its USB driver. Sent a compliant review then during the same day in the evening I received an email from tech support. The next day, today I gave it another shot based on the given info and it went thru.
I use Aardvark and Beagle on I2C coding. The both work really well. Very appreciate TotalPhase's customer support.
0
0
אמיל Apr 114 2018 Apr 25 201821:00
  • more than 2 year(s)
  • Rating:
well received the item
well received the item
0
0

31-35 of 74

What kind of abuse are you reporting?
Please, wait...