Earlier this month we announced that we would start shipping our new Advanced Cable Tester at the end of September.  As we developed this product,  we were thinking about the potential impact of faulty USB Type-C cables.  First and foremost was the potential safety hazard associated with up to 20V and 5 Amps.  Benson Leung of Google made...

Q: I was looking for an I2C development tool to program an EEPROM chip and monitor the data as I program the EEPROM. Looking at your website, I found two I2C tools - the Aardvark I2C/SPI Host Adapter and the Beagle I2C/SPI Protocol Analyzer. Can you tell me what the difference is between the Aardvark and the Beagle? Which tool should I use?

Working with USB 2.0? Check out this brand new video on how to set a USB 2.0 complex match and trigger using the Beagle USB 5000 SuperSpeed Protocol Analyzer! Similar to the USB 3.0 complex match and trigger feature, use the USB 2.0 complex match and trigger function to trigger a capture or an external output. This special feature is availab...

Watch and learn how to use the packet truncation and configuration management features in the Data Center Software! This short video provides a quick overview on how to use these tools in Data Center with the Beagle USB 5000 SuperSpeed Protocol Analyzer. Packet truncation is a hardware filter that can be applied to USB 3.0 captures. Users ca...

In this video, Mark Butcher uses the Komodo CAN Duo Interface to enable uTasker (pronounced micro-tasker) to connect to two separate CAN buses. Mark utilizes both the Komodo's passive and active features to send and receive messages from the Kinetis tower while displaying traffic across the bus.

We are pleased to announce our newest video spotlighting one of the many features of our Data Center Software -- Using Data Center's LTSSM View for USB 3.0 Debugging!

LTSSM, or Link Training Status State Machine, is new in USB 3.0. We've developed a video that helps explain what the link states are and how to take advantage of them during deve...