kelly


Email: kelly@totalphase.com

Posts by kelly:

Programming a Single Sector of an SPI Flash Using the Cheetah Adapter and Flash Center - Part 1

The Cheetah SPI Host Adapter is popular for its fast SPI programming capabilities. In this week's Support Question of the Week, we will feature a two-part series focusing on how to program a single sector of an SPI flash device using the Cheetah adapter with the Flash Center Software.

This two-part article is also available in our Total Phase ...

How to Read and Write to an I2C EEPROM Using the Aardvark adapter and Control Center - Part 2

Here is part 2 of our Support Question of the Week feature on how to read and write to an I2C EEPROM with the Aardvark I2C/SPI Host Adapter and Control Center Software! In Part 1, we provided some background on the set up of the I2C EEPROM with the Aardvark adapter. Now, in part 2, we will demonstrate how to write and read back several bytes...

How to Read and Write to an I2C EEPROM Using the Aardvark adapter and Control Center - Part 1

One of the most popular uses for the Aardvark I2C/SPI Host Adapter is to read and write to an I2C memory device. In this special two-part Support Question of the Week feature, we will focus on how to take information in an EEPROM datasheet and execute commands with the Control Center Software. Engineers can also accomplish reading and writin...

Support Question of the Week: Synchronizing Output from a USB 2.0 Analyzer

Q: I'm working on analyzing data on a USB 2.0 bus and I would like to synchronize the USB data with an external device. I was looking on your website and I see that you have three USB protocol analyzers. Would I be able to use any of these to trigger another device?

A: Thanks for your question! Total Phase does offer three USB protocol ana...

Support Question of the Week: Transfer Rate and Size for SPI Programming

Q: I recently came across two of your products – the Cheetah SPI Host Adapter and the Aardvark I2C/SPI Host Adapter. I am interested in programming SPI data, but I'm not sure which SPI host adapter I should use. Can either of these host adapters support 16-bit, 32-bit, or larger continuous transfers to an SPI slave? I'm looking to generate...

Support Question of the Week: Erasing Memory from Any Total Phase Product

Q: I'm interested in buying some of your products, but I have a few questions. First, is there any memory in any of your products that would retain information when powered down? If the answer to this is yes, I have another question – is there a sanitization procedure for these devices that can be performed after using a classified processin...