What is the Best Software to Use with the Komodo CAN Solo Interface to Read Complete Data?

Question from the Customer:

I am using the Komodo CAN Solo Interface with Komodo GUI Software to run a CAN module from a Linux host system. I am sending data through the General CAN Mode.  My concern is when reviewing the data log 3 out of 8 bytes of data at the receiving end are masked.

For example, if I intend to send deadbeef55667788, t...

How Can I Best Update the Aardvark Software API to Promira Software API When I Need to Maintain Specific IP Addresses?

Question from the Customer:

I recently purchased the Promira Serial Platform to replace the Aardvark I2C/SPI Host Adapter. I am trying to “hand over” the Aardvark Software API code to the Promira Software API I2C/SPI Active code.

aardvark-250  Promira Serial Platform

At first, I tried using the Promira Aardvark Wrapper Software API to update the Aardvark I2C/SPI H...

Is Ground Electrically Isolated From the Cheetah SPI Host Adapter when I Apply External Power to the SPI Device?

 Cheetah SPI Host Adapter

Question from the Customer:

I understand the Cheetah SPI Host Adapter comes with the option of using either an external power supply or the Cheetah adapter (with power from the USB bus I assume) to drive the SPI output.

My question is about ground - if I am using an external power supply to drive the SPI device output, is the ground from t...