How Do I Set Up the Promira Serial Platform to Run an Async Queue or a Sync Queue to write and read to an SPI Device?

Question from the Customer:

I'm trying to use the Promira Serial Platform to write and read to SPI devices: one with an async queue, and another with a sync queue. Can you provide examples to do this?

Response from Technical Support:

Thanks for your question! The Promira Software API I2C/SPI Active is just the software you are looking for t...

What Causes the Split Orphaned Packets that the Beagle USB 480 Protocol Analyzer Captures and Detects?

Question from the Customer:

I am using the Beagle USB 480 Protocol Analyzer, and have a question about the errors that the Data Center Software captures and reports. Following is a block diagram of my setup.

USB Test Setup with Beagle 480 USB Protocol Analyzer Figure 1: USB Test Setup

I see continuous split orphaned transactions on the Beagle analyzer when I plug a keyboard (or mouse) into th...

Using the Total Phase Komodo CAN Interfaces for Specialized Test and Development Projects

Question from the Customer:

We are using the Aardvark I2C/SPI Host Adapter and the Cheetah SPI Host Adapter for our embedded microprocessor development project. They work great and really help reduce the test and development time for our projects. We are now looking at using Komodo CAN Interfaces, for our application that will use J1939 an...