Support Question of the Week: How can I use LabVIEW with the Cheetah SPI Host Adapter to transfer large amounts of data at high-speeds?

I have an SPI device that supports continuous read/write, and its format is not standard. The size of data for this device is approximate 1Mbit. Because the format is not standard, I plan to use LabVIEW so I can modify the SPI header to match the device that will drive. I have been using the AardvarkTM I2C/SPI Host Adapter, but for the highe...

Support Question of the Week: How do I use the Data Center Software with the Komodo CAN Interface to Generate and Capture CAN Bus statistics?

We are using a KomodoTM CAN Duo Interface and Data CenterTM Software.  We need to generate CAN Bus statistics for the following:

  1. Error Rate (either % or per/time)
  2. Packets / Time
  3. Bus Usage % (time packets on bus / time bus free)

Can you provide us information about obtaining this information for CAN bus statistics?

Thanks for your quest...

Support Question of the Week: Using the Aardvark Host Adapter API Software, How Does the Slave Select Signal (SS) Work with MOSI Data and Multiple SPI Slave Devices?

 

I am using the AardvarkTM I2C/SPI Host Adapter as an SPI master with multiple slave devices. Can you clarify how the  Aardvark API Software command aa_spi_write() works?

Is Slave Select asserted for each byte sent MOSI (master output slave input)?
-or-
Is Slave Select asserted for each byte sent MOSI (master output slave input)?

Thanks fo...