Features
- Flash and burn I2C and SPI Serial EEPROMs and SPI Flash
memory that are in any of these standard chip packages:
DIP8, SOIC8 or TSSOP8.
- Specify 5V, 3.3V, or an external VDD Source at any voltage
level.
- Connect or disconnect Slave Select (SS) and change the
polarity of SS.
- Gang-Program multiple devices by using multiple socket
board and programming adapter sets in parallel on the same
host computer.
Figure 1: EEPROM Socket Board
Sample Configuration
Different devices may have different pin configurations. In
order to provide maximum flexibility, the EEPROM Socket Board
provides stubs for each of the pins and each of the
signals. Using the included 8-pin ribbon cable, users can
easily connect the appropriate source to each pin of the
target device.
Figure 2: Each EEPROM Socket Board includes an
8-pin ribbon cable to connect the appropriate sources to each
pin of the target device.
Figure 3: This is the view from the top of
the EEPROM Socket Board which has been configured to program
an I2C EEPROM which has been loaded into the TSSOP8
socket. One end of the supplied 8-pin ribbon cable has been
connected to the 8 pins of Pin Board connector around the
graphic of the chip. The other end has been connected to the
appropriate sources as indicated by the device's
datasheet.
What is Included
Every unit comes complete with the following items:
- EEPROM Socket Board
- 6" 8-pin cable
| Part Number |
Description |
Quantity |
Unit Price
|
|
TP240511
|
EEPROM Socket Board - v1.00
|
1 |
75.00
|
This price is discounted to $60.00 with
an accompanying purchase of any of the following products:
I2C Development Kit, SPI Development Kit, Flash Programming Kit, EEPROM Programming Kit, Aardvark I2C/SPI Host Adapter, Beagle I2C/SPI Protocol Analyzer, Cheetah SPI Host Adapter.
For a customized quote, please use our automated quote system.