Beagle USB 5000 v2 SuperSpeed Ultimate Protocol Analyzer

True Interactive Real-Time Performance

Non-intrusively monitor USB 3.0 and USB 2.0 and interactively analyze the data as soon as it is captured on the bus. Avoid engineering bottlenecks caused by waiting for captured data to be downloaded and parsed. Developers can repeatedly disconnect and reconnect a device or iteratively exercise it and see the resulting USB traffic immediately, saving time and reducing frustration. There is no need to reset the analyzer, restart a capture, and wait for all the data to be downloaded and parsed again and again.

Fast Data Analysis

Filter and quickly search for data of interest while the capture is still running. Utilize the real-time statistics function of the Data Center Software to view packets and errors on the bus.

Unlimited Capture Sizes

All Beagle USB 5000 models feature Infinite Capture, our solution that enables users to capture more data than is stored in their on-board buffer. Data is continuously streamed from the standard 4 GB buffer to the analysis PC, allowing total capture size to far exceed the hardware buffer memory. Since the bulk of USB traffic occurs in bursts, the Ultimate model analyzer can quickly catch up with the USB analysis traffic via it's standard USB 3.0 downlink and free buffer space for more data.

Real-Time USB Class-level Decoding with the Data Center Software

USB data is easier to understand with real-time decoding of class-level data. Class-level decoding is automatic – no need to wait for the capture to download and apply decoding. The Data Center Software supports multiple USB classes. For USB classes not included in this list, developers can save USB configurations to apply decoding after the capture.

Match/Action Triggering and Filtering

Match/Action triggering and filtering allows developers to trigger the capture, filter data, or set external triggers by matching data patterns, packet types, error types, and more. Create flexible state-based event triggers with up to 8 independent states and 6 matches per state for USB 2.0 captures. Advanced multi-state triggers and filters for USB 3.0 captures are available with the USB 3.0 Advanced State-Based Matching Option.

Multi-Analyzer Synchronization

Applications may require multiple analyzers for monitoring data transfers across the system. With the advanced sync feature, engineers can create multi-analyzer scenarios to measure latency across the whole system with a level of precision previously unattainable.

SuperSpeed Downlink

Enable longer captures with the USB 3.0 downlink. Working with Total Phase's real-time display, USB 3.0 data is captured and displayed at a much faster rate. There's no wait time for data to be downloaded; data is shown immediately on screen.

Digital I/O for Synchronization

Trigger an output to a scope or logic analyzer and gain an even better understanding of your system. The Beagle USB 5000 v2 SuperSpeed Protocol Analyzer Ultimate provides dedicated USB 3.0 input and output to synchronize with external equipment.

The Beagle USB 5000 v2 analyzer Ultimate also offers four digital inputs and four digital outputs dedicated to USB 2.0.

Easy Collaboration

Easily share data with your colleagues around the world using the freely downloadable Data Center Software. Send saved captures to your colleagues, and they can view the data exactly as you see it.

Overview

• Non-intrusively monitor USB 3.0 and USB 2.0 simultaneously
• 4 GB on-board buffer with live data streaming to the analysis computer
• Real-time USB class-level decoding with the Data Center Software
• Precise timing down to 2 ns resolution
• Match/Action trigger and filter system
• USB 3.0 downlink enables longer captures
• Enable advanced sync to monitor applications requiring multiple analyzers
• Automatic support for data scrambling, spread spectrum clocking, polarity inversion, and receiver detection
• Multiple digital inputs and outputs for synchronizing with external devices
• Fully Windows, Linux, and Mac OS X compatible with support for 32- and 64-bit systems

Comparison Chart: See how the Beagle USB 5000 v2 Protocol Analyzer Ultimate compares to other USB 2.0 analyzers on the market.

What is Included

• Beagle USB 5000 v2 SuperSpeed Protocol Analyzer unit
• (1) 1 foot USB 2.0 A->B cable
• (3) 3 foot USB 3.0 A->B cable (24AWG)
• (1) 1.5 foot Mini-DIN 9 Digital I/O cable
• AC adapter and cable
• Software (downloadable from website):
  • Windows USB Drivers
  • Linux USB Hot Plug Configuration files
  • Data Center Software
  • Datasheets
  • Documentation

Specifications

Product Model	Beagle USB 5000 v2 SuperSpeed Protocol Analyzer
Supported Specifications	USB 3.0, USB 2.0, USB 1.1, USB 1.0
Supported Link Speeds	5Gb/s, 480Mb/s, 12Mb/s, 1.5Mb/s
Memory	4 GB
Real-time Class Decoding	Audio (1.0, 2.0), CDC, DFU, HID, Hub, Mass Storage, UAS, Video, and more
Timestamp Accuracy	2 ns timing resolution for USB 3.0 and 16.7 ns for USB 2.0
USB 3.0 Features	Automatic support for data scrambling, polarity detection, spread spectrum clocking, and receiver detection
Low-Level Error Detection	Invalid PID, bad CRC, timeout, frame sequence errors, state transition errors, and more
Bus States	Detection of USB 3.0 link training, USB 3.0 link operating states (LTSSM) and all USB 2.0/1.1/1.0 bus states
Triggering/Filter	Basic and Complex matching system for triggering and filtering
External Synchronization	USB 3.0 1 External Input (SMA) 1 External Output (SMA) USB 2.0 4 External Input (Mini-DIN9) 4 External Output (Mini-DIN9)
Minimum Analysis PC Requirements	Intel or AMD processor running at a minimum speed of 2.0 GHz 2 GB of physical RAM 1 GB of hard disk space High-speed USB port
Supported Operating Systems	Windows XP (SP2 or later, 32-bit only) Windows Vista (32-bit and 64-bit) Windows 7 (32-bit and 64-bit) RHEL 5 - Kernel 2.6+ (32-bit and 64-bit) Mac OS X 10.5 Leopard (32-bit and 64-bit) Mac OS X 10.6 Snow Leopard (32-bit and 64-bit)
Front Panel	Analyzer Power, Target Power, USB 3.0 RxTerm Host and Device, USB 3.0 Activity Host and Device, USB 2.0 Activity Device, Capture, Trigger
Rear Panel	Power Switch, Analysis PC USB Port, DC Power: max 25W
Power Supply	100-240V 50/60Hz AC - adapter included
Carrying Case	Included
Dimensions	16 x 15.4 x 4.7 cm (6.3" x 6.1" x 1.8")
Weight	900 g (1.9 lbs)
Product Warranty	Two years

 

Data Center Software

The Data Center Software is the free software that is included with the Beagle™ USB 5000 v2 SuperSpeed Protocol Analyzer. Everyone is welcome to download this software from the Total Phase website to allow for easy collaboration through the sharing of capture data files.

Features include:

• Capture and display USB traffic in true real time with LiveDisplay™ technology
• Interactive filtering and searching in real time with LiveFilter™ and LiveSearch™ tools
• Packets data grouped in an expandable tree view format

Learn more about the Data Center Software.

Rosetta Language Bindings - Development API

The full power of the Beagle analyzer is available for custom software applications through a free and royalty-free API. Developers have access to the same API used by the Data Center Software. Full functionality is available for automated test suites, production test fixtures, and more.

• Develop custom solutions in C/C++, C#, VB, .NET, Python
• Custom parsing of proprietary protocols
• Clean API is well-documented and easy to integrate
• Fully Windows, Linux, and Mac OS X compatible
• Separate 32-bit and 64-bit versions are available for all three platforms
• Royalty-free API can be used without licensing fees

Learn more about Rosetta Language Bindings and the API.

Compatibility

The Beagle Protocol Analyzer was engineered from the very beginning to be a cross-platform device. The software and utilities for the Beagle Protocol Analyzer function on Windows, Linux and Mac OS X so that you can develop software for your preferred platform.

Windows

The software is officially supported on Windows XP (SP2 or later, 32-bit and 64-bit), Windows Vista (32-bit and 64-bit), Windows 7 (32-bit and 64-bit), and Windows 8 (32-bit and 64-bit).

Linux

The software has been designed for Red Hat Enterprise Linux 4 and 5 with kernel 2.6. Customers have reported successful operation with SuSE and Ubuntu distributions. Please be aware that there may be significant differences and idiosyncrasies in the way that different distributions of Linux operate. As such, Total Phase may not be able to support your particular distribution of Linux. Support will be offered on a case-by-case basis.

Mac OS X

The software is supported on Intel versions of Mac OS X 10.5 Leopard, 10.6 Snow Leopard, 10.7 Lion, and 10.8 Mountain Lion.

64-bit Support

The graphical software is offered as a 32-bit or 64-bit application on Windows, Linux, and Mac OS X.

Free updates

You will never have to worry about being out of step with the latest software features. Software and firmware updates are always freely available in the Downloads section of this website.

Beagle USB 5000 v2 SuperSpeed Standard Protocol Analyzer $3000	Beagle USB 5000 v2 USB 2.0 Protocol Analyzer $2500	Beagle USB 480 Protocol Analyzer $1200
Beagle USB 12 Protocol Analyzer $400	SMA M/M Cable 2 ft $12.50	Digital I/O Cable with Grabber Clips $75
HDMI M/M Cable 3 ft $12.50	Data Center Software